Sublimation Coating Quad Pack – Complete Subli Glaze™ Coating Range 400ml / 250ml

Description

Quad pack including:

Clear Subli Glaze™ Sublimation Coating Spray 400ml
Opaque White Base Coat Subli Glaze™ Spray 400ml
Translucent White Subli Glaze™ Spray 400ml
Adhesion Promoter Subli Glaze™ 250ml

Unfortunately these goods must be shipped by courier service; DPD Express) Royal Mail class aerosol products as prohibited and we are unable to continue to ship via this service. We apologise for the inconvenience.

Subli Glaze™ is the only do-it-yourself sublimation coating solution that is designed to enable sublimation decoration on a whole range of surfaces. Coat substrates quickly and easily, making almost any surface sublimation ready, expanding your creative options and product range with these exceptional value coatings.

These coatings comply with the food safety EU REACH regulations and the north America CONEG regulations and are checked all along the production process to comply with the relevant regulations. Providing they are applied and cured as directed.

The Subli Glaze™ coating range is not suitable for fabrics (cotton) sublimation – the coatings are designed for use on hard surface substrates only.

How to use Subli Glaze™ Clear Sublimation Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. Apply Subli Glaze™ Clear Sublimation Coating smoothly and evenly, holding the can approx. 250mm (10?) from surface using light passes at room temperature, use multiple passes for a higher gloss finish but do not allow the spray to pool on the surface.
4. Allow to air dry for 10 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.

Key Features

• Provide a polymer layer which sublimation inks can bond to allow effective image transfer.
• 400ml aerosol spray
• 2-3sq metre coverage

How to use Subli Glaze™ Opaque White Sublimation Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. If applying to a polished glossy surface, prime with Subli Glaze™ Adhesion Promoter.
4. Apply in an even motion holding the can approx. 250mm (10?) from surface using light passes over the substrate at room temperature.
5. Allow substrate to air dry for 5 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.

Key Features

• Provide a solid white background on which to transfer an image.
• Maximise the effect of the transfer of the image.
• 400ml aerosol spray
• 2-3sq metre coverage

How to use Subli Glaze™ Translucent White Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. Prime the surface with adhesion promoter.
4. Coat glass first with Subli Glaze™ Clear Coating and allow to air dry for 5 minutes.
5. Apply a fine coating of Translucent White over the clear and allow to air dry for 5 minutes.
6. Cure in oven at 160°C (320°F) for 15-20 minutes.

Key Features

• Provide a translucent white background which the image is transferred through.
• Allow light to pass through the coating to illuminate the image.
• 400ml aerosol spray
• 2-3sq metre coverage

How to use Subli Glaze™ Adhesion Promoter

1. Ensure all surfaces to be pre-treated are clean, dry, and free from dirt or grease.
2. Apply liberally with a soft clean cloth over the surface to be coated to ensure even coverage.
3. Allow Subli Glaze™ Adhesion Promoter to bond with the surface for approximately 30 seconds before removing any excess with clean cloth. When removing the excess, try to eliminate any grease, or smudge marks if any present.

Key Features

• Allow your chosen Subli Glaze™ product to adhere to hard substrates with a smooth surface
• Prevent separation of coating and substrate after pressing
• 250ml bottle
• 2-3sq metre coverage

This product was previously known as ‘Digi Coat’

View the full Subli-Glaze coating range here