Sublimation Coating Twin Pack – Clear Subli Glaze™ & Opaque White Base Coat Subli Glaze™ 400ml

Description

Twin pack including:

Subli Glaze™ Clear Sublimation Coating Spray 400ml
Subli Glaze™ Opaque Base White Coat Spray 400ml

Unfortunately these goods must be shipped by courier service; DPD Express) Royal Mail class aerosol products as prohibited and we are unable to continue to ship via this service. We apologise for the inconvenience.

These are commonly used together to create a solid white base, sublimation ready polymer coating on a range of surfaces including wood, metal, stone, glass and slate.

Subli Glaze™ is the only do-it-yourself sublimation coating solution that is designed to enable sublimation decoration on a whole range of surfaces. Coat substrates quickly and easily, making almost any surface sublimation ready, expanding your creative options and product range with these exceptional value coatings.

These coatings comply with the food safety EU REACH regulations and the north America CONEG regulations and are checked all along the production process to comply with the relevant regulations. Providing they are applied and cured as directed.

The Subli Glaze™ coating range is not suitable for fabrics (cotton) sublimation – the coatings are designed for use on hard surface substrates only.

How to use Subli Glaze™ Clear Sublimation Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. Apply Subli Glaze™ Clear Sublimation Coating smoothly and evenly, holding the can approx. 250mm (10?) from surface using light passes at room temperature, use multiple passes for a higher gloss finish but do not allow the spray to pool on the surface.
4. Allow to air dry for 10 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.

Key Features

• Provide a polymer layer which sublimation inks can bond to allow effective image transfer.
• 400ml aerosol spray
• 2-3sq metre coverage

How to use Subli Glaze™ Opaque White Sublimation Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. If applying to a polished glossy surface, prime with Subli Glaze™ Adhesion Promoter.
4. Apply in an even motion holding the can approx. 250mm (10?) from surface using light passes over the substrate at room temperature.
5. Allow substrate to air dry for 5 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.

Key Features

• Provide a solid white background on which to transfer an image.
• Maximise the effect of the transfer of the image.
• 400ml aerosol spray
• 2-3sq metre coverage

This product was previously known as ‘Digi Coat’

View the full Subli-Glaze coating range here